Hyundai Veloster N Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Hi Guys,

So my owner's manual for the 2020 Veloster N PP does not say the socket size (I believe it is 16 mm), or the torque specifications for installation of spark plugs. Anyone know where to find this information?

Oh and btw, this is for prepping to get a JB4 (so i am looking at HKS M45XL)
 

·
Registered
Joined
·
111 Posts
Yes, it's important to have proper torque on every bolt and item on the car. I don't have torque wrench that will work under like 35lb.ft. On all my cars that I have done sparkplugs I just go by what the box says. Hand tight and then like 1/2 or 1/4 turn depending on manufacturer and type of plug. I have NEVER had any issues with my plugs. Yes, if you have the tool, go by spec but I have been fine with what the box says.
 
1 - 6 of 6 Posts
Top