Joined
·
3 Posts
Does any know which engine code our veloster n pp is? 3 options g4kf, g4kh, or g4kl. Hyundai was like wtf u talking about? Lol
Theta-ll engine code
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Engine and Technical DiscussionI need some confirmation on what size the studs are for bolting the downpipe onto the turbo/exhaust manifold. I check Hyundai's parts diagram but I don't see it listed. Some people say to arp offered some, either 400-8006 or 400-8008. But I'm not dropping 70-90 bucks without knowing exactly...
- 4
- 44
-
Engine and Technical DiscussionShifting into 3rd I noticed that I can feel it going into third instead of smoothly going in like the other gears, it's almost like I can feel mechanical feedback through the shifter upposed to the smooth shift for other gears. It's not grinding or making any noise the shift just feels almost...
- 8
- 277
-
Esoterikk · updated
-
Engine and Technical DiscussionHey eveyone! Now that I'm waiting for the arrival of my first mod parts to arrive and install, I'm giving thoughts to my next mod - both motor mounts. I've read a lot on this forum about the TTR mounts and it seems like they are the best quality and provide the best bang for the buck. Even...
- 6
- 591
-
MIST3RX · updated
-
Engine and Technical DiscussionHey all, I've had my N for over 2 years now, and I have noticed that the turbo will not spool under normal load until the oil gets to a certain temp, usually around 140F. It's not an issue of any sort, as once the oil is warm, everything behaves as it should, and even if it's cold, if I really...
- 13
- 595
-
OtherDude · updated
-
Engine and Technical DiscussionI've seen in a few Member Builds posts that some have added several of the Cerma treatments. From reading their info on their website, it appears they've engineered a nano friction reduction compound that binds to the metal in the cylinders, on gears, bearings, etc., with the intention of...
- 3
- 205
-
MIST3RX · updated
Join now to ask and comment!