[ItWasJustified]

Has anyone got in deep with swapping out the seats in their VN, or at the minimum removing the tracks to have a lower/fixed seat?

I'm mainly looking to just get a lighter (and lower) seat so I can actually fit in the car with a helmet on.

 

[SD VeloN]

I’m interested to know as well. I know they make seat rail adapters specifically for the Veloster N if you’re looking to install some aftermarket bucket seats.

 

[SD VeloN]

VAC RACE SEAT FLOOR MOUNT ADAPTER FOR HYUNDAI VELOSTER N / I30 N & Elantra N 2019+

We are the largest retailer of 2010-2016 Hyundai Genesis Coupe parts. Browse our extensive selection of aftermarket performance parts and accessories today.

www.genracer.com

 

[Fauxfreshness]

In case this thread is found, I went with Corbeau seats (had the driver side shaved an inch) and their sliding rails for the second generation Veloster. Vastly simpler, and I can now see those shift lights that everyone (shorter than me) loved so much. LOL I’m 6’2” with a long torso, and I gained 2-3” of headroom over the stock 2020 seat dropped to its lowest setting.

 

[ItWasJustified]

In case this thread is found, I went with Corbeau seats (had the driver side shaved an inch) and their sliding rails for the second generation Veloster. Vastly simpler, and I can now see those shift lights that everyone (shorter than me) loved so much. LOL I’m 6’2” with a long torso, and I gained 2-3” of headroom over the stock 2020 seat dropped to its lowest setting.

Link me please.

 

[Fauxfreshness]

A4

Over 50 years of providing the world with the best in aftermarket Street Seats, Racing Seats, Off Road Seats, Jeep Seats, Suspension seats, Seat Brackets, Harness Belts and more.

corbeau.com

Rail kits are on there as well. I ordered everything over the phone as they didn’t have a lot of seats in stock, but I got the A4 wide in microsuede.

 

[Johnny_C]

Recaro SPG, Vac floor mount, vac side mount, vac slider confirmed fitment in the Veloster N.

 

[N_Dorphins]

Recaro SPG, Vac floor mount, vac side mount, vac slider confirmed fitment in the Veloster N.

Where do you attach the stock seatbelt buckle to with those Vac mounts? My planted bracket has a little arm to attach it to but I don't see that with those brackets.

 

[Johnny_C]

Where do you attach the stock seatbelt buckle to with those Vac mounts? My planted bracket has a little arm to attach it to but I don't see that with those brackets.

I used the VAC lap belt adapter and it worked perfectly. Will make a post about it later on…

 

[Fauxfreshness]

I used the VAC lap belt adapter and it worked perfectly. Will make a post about it later on…

I'm more interested in what you're doing with the OCS sensor. I've had my seats swapped for a while and have it dealt with for the most part, but I have other ideas that would treat it more like the stock arrangement.

 

[Johnny_C]

I'm more interested in what you're doing with the OCS sensor. I've had my seats swapped for a while and have it dealt with for the most part, but I have other ideas that would treat it more like the stock arrangement.

Do you mean for the buckle? Not too familiar of the OCS sensor in the VN.

 

[N_Dorphins]

no he is talking about the fluid bladder that is under the passenger seat cushion.

 

[Johnny_C]

no he is talking about the fluid bladder that is under the passenger seat cushion.

Only removed the driver side seat so I’d have to take a look at it next time we do some work on the car.

 

[N_Dorphins]

If you have no plans on removing the passenger side then its not an issue.