Hyundai Veloster N Forum banner
1 - 20 of 69 Posts

·
Registered
Joined
·
35 Posts

·
Registered
Joined
·
4,847 Posts
Have you tried it or know of someone who did?

I found this:

https://www.hyundaioemparts.com/oem-parts/hyundai-ec-mirror-w-compass-homelink-b-2v062adu00

Seems to fit regular Velosters, so wouldn't it be a better fit for the N?
Spoke to the gentleman who actually sells them; Bob's Automotive Mirrors & More LLC. He knows his stuff and is able to tell you what mirror goes with what car. The mirror has the three Bluelink buttons plus the Homelink buttons. The Homelink buttons are independent of Bluelink. If it requires the additional harness for power he supplies it as well.
https://www.ebay.com/str/Bobs-Automotive-Mirrors-And-More?_trksid=p2047675.l2563
 

·
Registered
Joined
·
13 Posts
I just installed this P/N 3Q062-ADUP0 mirror this past weekend as I too was used to having this complete functionality in our last two Hyundai cars (2013 Sonata Limited 2.0T w/Premium and 2014 E-GT w/Style & Tech). There are four wires feeding the original non-Homelink mirror which are in the same places needed for the new one. All I needed to add was constant power (tapped off of the front overhead console/lighting assembly) at position #10 in the connector. The mirror I bought (https://www.ebay.com/itm/323512442876) was new for $47.99 and included the installation kit which is where you can extract the female terminal, wire and blade connector you'll need to add to your car's current mirror harness connector.


EZPZ!
 

Attachments

·
Registered
Joined
·
85 Posts
I just installed this P/N 3Q062-ADUP0 mirror this past weekend as I too was used to having this complete functionality in our last two Hyundai cars (2013 Sonata Limited 2.0T w/Premium and 2014 E-GT w/Style & Tech). There are four wires feeding the original non-Homelink mirror which are in the same places needed for the new one. All I needed to add was constant power (tapped off of the front overhead console/lighting assembly) at position #10 in the connector. The mirror I bought (https://www.ebay.com/itm/323512442876) was new for $47.99 and included the installation kit which is where you can extract the female terminal, wire and blade connector you'll need to add to your car's current mirror harness connector.


EZPZ!
Looks like you got a good price as seller price now shows $79.99!

Was the mirror a direct mount / replace with the Original one mechanically (is pop old off, pop new on.). Also, did the install kit tap into the console light power (via intermediary connector or something) or did you physically have to cut/splice into the factory light harness?

Just wondering how much it affects factory config of wiring.

Thanks

Thanks.
 

·
Registered
Joined
·
22 Posts
Well, I'm also interested.
However, is it the people posting the incomplete links or does this forum block posted links?
Because I would like to see these and, probably, buy one, except that these are all incomplete 404s...



Randy
 

·
Registered
Joined
·
22 Posts
OK now I feed really DUMB!:(

All of the links now work. It must have been our server that occasionally blocks good links as it blocks "forbidden" content.

Does anybody have this issue: at night when I try to flip the mirror dimmer, I almost always inadvertently press one of those stupid Bluelink buttons:mad: And this morning when i flipped it out of dim mode, pressed the SOS button:mad::mad::mad::mad::mad:
 

·
Registered
Joined
·
35 Posts
I just installed this P/N 3Q062-ADUP0 mirror this past weekend as I too was used to having this complete functionality in our last two Hyundai cars (2013 Sonata Limited 2.0T w/Premium and 2014 E-GT w/Style & Tech). There are four wires feeding the original non-Homelink mirror which are in the same places needed for the new one. All I needed to add was constant power (tapped off of the front overhead console/lighting assembly) at position #10 in the connector. The mirror I bought (https://www.ebay.com/itm/323512442876) was new for $47.99 and included the installation kit which is where you can extract the female terminal, wire and blade connector you'll need to add to your car's current mirror harness connector.


EZPZ!
I was able to get it at $47.99! Thanks. And nvm, I figured out how to tap the wires. Constant tap from the overhead light while the ignition tap is from the original mirror cable.
 

Attachments

1 - 20 of 69 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top