Beeping in the N
1 - 6 of 6 Posts
The noise generator?
Joined
·
2,875 Posts
Video would help!!
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
Engine and Technical DiscussionHey all, I've had my N for over 2 years now, and I have noticed that the turbo will not spool under normal load until the oil gets to a certain temp, usually around 140F. It's not an issue of any sort, as once the oil is warm, everything behaves as it should, and even if it's cold, if I really...
- 13
- 594
-
OtherDude · updated
-
Engine and Technical DiscussionShifting into 3rd I noticed that I can feel it going into third instead of smoothly going in like the other gears, it's almost like I can feel mechanical feedback through the shifter upposed to the smooth shift for other gears. It's not grinding or making any noise the shift just feels almost...
- 7
- 274
-
Esoterikk · updated
-
Engine and Technical DiscussionI need some confirmation on what size the studs are for bolting the downpipe onto the turbo/exhaust manifold. I check Hyundai's parts diagram but I don't see it listed. Some people say to arp offered some, either 400-8006 or 400-8008. But I'm not dropping 70-90 bucks without knowing exactly...
- 3
- 44
-
Engine and Technical DiscussionI've seen in a few Member Builds posts that some have added several of the Cerma treatments. From reading their info on their website, it appears they've engineered a nano friction reduction compound that binds to the metal in the cylinders, on gears, bearings, etc., with the intention of...
- 3
- 204
-
MIST3RX · updated
-
Engine and Technical DiscussionWell, my car threw a CEL - code P0070 - Ambient Air Temperature Sensor Circuit. This happened the morning after a very heavy rainstorm and my car was outside all night. My wife got in and started the car, and that's when it threw this code. I came down and got in the car, and her eyes were as...
- 6
- 252
-
MIST3RX · updated
Join now to ask and comment!